Filter
Top Products
4 • Using ELP Link IV
104
Installing the Software for a Macintosh
Follow these steps to install the software for the Macintosh:
Note: You can not currently use the ELP Link IV software with a Power
Macintosh G3 or iMac. Check with your dealer for future support.
1. Insert the Projector Software CD into your CD-ROM drive.
2. Open the CD-ROM drive icon, if necessary.
3. Double-click the Installer icon.
4. You see a dialog box asking you to select a language for the
software. Select a language and click OK.
5. You see the Software License Agreement screen. Read the
agreement and click Accept.
6. You see the Program Install screen. Make sure ELP Link IV is
selected and, as necessary, Acrobat Reader, and then click OK.
7. You see the Folder to Install screen. Select the folder where you
want to install the software and click Install.
8. When the installation is finished, close the ELP Installation folder.
Note: If you ever select Unconnected and Execute from the Option
menu, always uncheck the setting before exiting ELP Link IV so the
program starts correctly the next time you use it.