Filter
Top Products
Connecting to a Computer
25
3. Connect the other end of the projector video cable to the
computer’s video port.
4. Tighten the screws on all connectors.
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the ELP
Link IV software, you need to connect the main cable. It provides
connectors for:
❐ The PS/2 mouse or USB cable (to use the remote control as a
mouse)
❐ The serial cable (to use the ELP Link IV software)
Refer to this illustration while following the steps below.
PS/2 or USB cable
main cable
9-pin serial cable
Mouse/Com 1 port