Filter
Top Products
Using the Projector
35
Controlling Audio and Video
While giving your presentation, you may want to switch between
picture sources, temporarily turn off or freeze the picture, or adjust the
volume.
Make sure you’ve first set up your projector and connected your audio
or video source as described in Chapter 1.
Switching Between Picture Sources
You can connect the projector simultaneously to one computer source
and one video source. Then you can use the buttons on the projector
or remote control to switch between them.
■
Press the
Source
button on the projector to switch between
computer, S-video, and composite video sources.
■
Press the
Computer
,
Video
, or
S-Video
button on the remote
control to select the source you want to use.
After you select a source, the screen goes dark for a moment before the
image appears.
Freezing the Picture
You can use the remote control to freeze the current picture on the
screen.
■
Press the
Freeze
button to freeze the current image on the screen.
The sound will continue.
■
Press the
Freeze
button again to re-start it.
Select
Computer,
Video, or
S-Video