Filter
Top Products
Turning the Equipment On and Off
57
Note: EPSON offers the Mediaphile PAS (personal audio system) and
the Mediaphile CVS (clean voice system) for external amplification.
See page 5 for the part number and ordering information.
3. Connect the RCA plugs to the external amplified speaker or PA
system. Insert the cable’s red plug into the Audio R jack, and the
white plug into the Audio L jack.
Note: The internal speakers are disabled when an external audio
system is used.
Turning the Equipment On and Off
It’s best to turn on the projector and its attached equipment in the
following order:
1. Video source (such as a VCR), if your video source is not your
computer
2. Audio source (if different from computer or video source)
3. Computer
4. External amplified speaker or PA system (if necessary)
5. Projector (follow the steps in the next section)
When you are ready to turn off the equipment, turn them off in the
reverse order.