Filter
Top Products
Managing Projectors 123
Registering Your Projectors
Before you can monitor your projectors, follow these steps to register
them:
1. Click
Start > Programs or All Programs > Epson Projector >
EMP Monitor
or click the EMP Monitor icon in the taskbar. You
see this screen:
2. Click
Register projector. You see this screen:
3. Click
Auto detect to locate projectors currently operating on the
network. Or click
Manual registration and enter the projector’s
network IP address.
Click here
Click here
note
If Auto detect fails to find
the projector, your projector
may not be connected or
configured correctly for the
network. See page 52 to
configure the projector for a
wireless network.