Filter
Top Products
Maintaining the Projector 147
4. Turn the projector over. Press in on the tabs and lift up the lamp
cover.
5. Loosen the two screws holding the lamp in place (you don’t need
to remove them).
6. Hold the lamp as shown and pull it straight out.
7. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
Loosen, but don’t
remove these screws
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.