Filter
Top Products
Tips for Using the Paper Feeder
Following the tips below will give you the best performance
when printing with the paper feeder.
Load paper into the paper feeder before you turn on the
printer and send data. When the printer receives data from
the computer, it loads a single sheet automatically and
begins to print.
If the printer runs out of paper during a print job, reload
the paper feeder and then press the
LOAD/EJECT
button to
continue printing.
Press the
LOAD/EJECT
button if you need to eject a sheet of
loaded paper.
You can switch to manual loading to feed single sheets or
envelopes without removing the paper supply from the
paper feeder. For instructions, see “Loading Paper
Manually” in Chapter
2.
You can adjust the loading and print positions with the
printer’s micro feed feature. See “Controlling the Page with
Micro Feed” in Chapter
2.
Because most application
programs take care of the top and bottom margins, you
should usually adjust the margins by using your programs,
taking the printer’s default loading position into account.
The default page length for paper loaded from the paper
feeder is
61
lines (letter-size paper) and
65
lines
(A$-size
paper). You can change it using your application program
or printer commands, if necessary. See the Appendix for
more about printer commands.
If the ink does not dry fast enough, try removing sheets one
at a time as they finish printing.
1-18
Setting Up Your Printer