Epson 800 Printer User Manual


 
Plug another electrical device into the outlet to determine
whether it is working.
The lights come on briefly but then go off and stay off.
Check that the printer’s voltage rating matches the voltage of
your electrical outlet. If the voltages do not match, unplug the
printer and contact your dealer immediately. Do not reconnect
the power cord to an electrical outlet.
Printing
All lights on the control panel are on but nothing prints.
Contact your dealer,
Printing stops and the printer beeps five times.
A carriage error occurred. Turn off the printer. After a few
seconds turn it on again.
The INK OUT light flashes.
The ink cartridge is almost out of ink. Get ready to replace the
ink
cartridge.
The INK OUT light is on and the printer beeps three times; the printer
does not print.
The ink cartridge may be empty, or not installed at all. Replace
the
ink cartridge with a new one.
Printing stops and the PAUSE light is on.
Printing was temporarily suspended. Press the
PAUSE
button to
continue.
3-6
Maintenance and Troubleshooting