Filter
Top Products
Adjusting the loading position
The loading position is the position of the paper when the
printer loads it from the paper feeder or the manual feed slot. If
printing is too high or low on the page, you can change the
loading position with the micro-feed feature as follows:
1.
2.
3.
4.
Make sure the printer is turned on.
Load a sheet of paper from the paper feeder by pressing the
LOAD/EJECT
button, or from the manual feed slot by
inserting it into the slot.
Open the paper feeder cover.
As soon as the paper is loaded, hold down the
ALT
button
and press the
ECONOMY/CONDENSED
button to move
the loading position up
l/
180
inch, or the
FONT
button to
move the loading position down 1
/
180
inch. Continue
pressing the appropriate buttons until you reach the
position you want.
The pointer on the print head indicates the base line of printed
characters. (You may have to experiment a few times to get the
results you want.)
pointer
/
ink cartridge
5.
Close the paper feeder cover.
6.
Send data from the computer to start printing.
Using Other Printer
Functions
2-9