Epson G6170 Projector Accessories User Manual


 
Setting Options Description
Standby Mode Communication On Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
Monitor and control the
projector over a network
Output audio and video to an
external device (A/V Output
must be set to Always On)
Communication from the
HDBaseT port (Control
Communications must be set
to On)
HDBaseT Control Communications Selects the communication
settings for connections to an
Extron XTP
HDBaseT transmitter or switcher
Control Communications:
enables or disables
communication from the Ethernet
and serial ports on the
transmitter; turning on this setting
disables the projector's LAN, RS-
232C, and Remote ports (Extron
XTP must be turned off to use
this setting)
Extron XTP: set to On when you
connect an Extron XTP
transmitter or switcher to the
HDBaseT ports
187