Filter
Top Products
You can check the printer status in this window.
Note:
It might not be possible to retrieve the printer status during printing. In this situation, click the EPSON
Status Monitor 3 button in the Utility tab, and use the printer with the status window left open.
Setting the Auto Tear-Off Function
You can select whether to turn on the auto tear-off function. When the auto tear-off function is turned
on, the printer advances the continuous paper to the tear-off position automatically when a set time
has passed after printing.
1. Access the printer driver. See “Using the Printer Driver” on page 26.
2. Click the Utility tab, and then click the Auto Tearoff Setting button.
3. Select auto tearoff enabled and select the delay time box, or select auto tearoff disabled.
4. Click OK.
Setting the Buzzer
Setting whether the buzzer sounds when printing is finished
1. Access the printer driver. See “Using the Printer Driver” on page 26.
2. Click the Utility tab, and then click Other Config.
3. Select the Control Buzzer Settings check box, and then select Every Page or Only Last Page in
the Control Buzzer Settings drop-down list to have the buzzer sound when printing is finished.
Clear the Control Buzzer Settings check box to have the buzzer not sound.
4. Click OK.
5. Click OK.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Printer Software 35