Filter
Top Products
This software is installed automatically when the printer driver is installed.
Specify the following settings to communicate at high speed.
1. For Windows 8 or Server 2012:
Click Desktop on the Start screen, move the cursor to the top-right corner of the screen, click
Settings, and then click Control Panel. Next, click View devices and printers from the
Hardware and Sound category.
For Windows 7 or Server 2008 R2:
Click Start, and then click Devices and Printers.
For Windows Vista or Server 2008:
Click Start, click Control Panel, click Hardware and Sound, and then click Printers.
For Windows XP Professional or Server 2003:
Click Start, and then click Printers and Faxes.
2. Right-click the icon for the printer you want to change the settings for, and then click Printer
properties (Windows 8, 7, Server 2012, or Server 2008 R2) or Properties (Windows Vista, XP,
Server 2008, or Server 2003).
3. Click the Ports tab.
4. Select the BILPTx check box.
The parallel port name is BILPTx.
5. Change the BIOS setting on your computer to ECP mode.
For more information about this setting, see the manual for your computer.
EpsonNet Config
EpsonNet Config is software that allows the network administrator to detect printers on the network,
and then setup or change functions for the network printers individually or as a batch.
❏ You can make settings or changes for individual network printers or all network printers as a
batch.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Printer Software 39