Filter
Top Products
Choosing
a
Place for the Printer
When selecting a place to set up your printer, be sure to follow
the guidelines below.
0
Place the printer on a flat, stable surface.
0
Place the printer
&se
enough to the computer for the
printer’s interface cable to reach it.
0
Leave adequate room around the printer to allow for easy
operation and maintenance.
Q
cautio?c
Awid
loadions
that
ate
subject to
direct
sunlight, excessive
heat,
moisture, or
dust.
Q
.a
0
cl
0
Use a grounded outlet do not use an adapter plug.
Place the printer where you can easily unplug the power
cord.
Avoid
elect&al
outlets
contx&d
by wall switches or
automatic
timers.
Accidental disruption of power can wipe
out information in the memory of your printer or computer.
Avoid outlets on the same circuit as large motors or other
appliances that can cause fluctuations in line voltage.
Keep the entire computer system away from potential
sources of ekxtnxnagnetic interference such as
loudspeakers or
thebase
units of con3ess telephones.
If you plan to use a printer stand, follow these guidelines:
0
Use a stand that supports at least 16.0 kg
(3!53
lbs)
for the
L&)-570+
or 22.0 kg
(48.5
lbs)
for the
LQ-1070+.
Setting Up the Printer
1-3