Filter
Top Products
If your printer is double spacing, turn DIP switch 2-4 off. If
each line overprints the next, turn DIP switch 2-4 on.
Micro Feed
The micro-feed feature allows you to move the paper forward
or
t&cward
in
l/180-inch
inaements.
You can use this
feature to adjust the loading and
tear4
positions.
Before you adjust the loading position, it is set to the factory
setting (8.5
mm). By moving the paper backward, you can set
theloadingpositiontoas~~as5~mm~mthetopedgeof
the paper. You can then print more lines per page.
mn
you make adjustments to the loading or tear-off
posibIonswithoontinuous~~,theprinterremembersthe
new
position,
even if you turn off the printer.
When you adjust the loading position of single-sheet paper, the
printer remembers the new position until you turn off the
power. The loading position returns to the factory setting
(85mm)whenthepoweristumedonagain.
Tousethe~~feature,presstheALT~atthesame
time as you
presq
the
LOAD/EJECT
or
LUFF
button, as
indicated on the print&s control panel. To use the
mia&eed
feature,foBowthestepsbebw
1. Makesureprintinghasstopped.Ifnecessary,tifttheprinter
coverupsoyoucanseethepaperposition.
Using the Printer
3-13