Filter
Top Products
0
0
0
a
Never use a stand that tilts the printer at an angle of more
than 15 degrees from
horizontaL
If you install a cut-sheet
feeder, the stand must keep your printer
1eveL
If you plan to load continuous paper through the bottom of
the printer, choose a stand that provides an unobstructed
paper
pa**
Position your
printeis
power cord and interface cable so
they do not interfere with paper feeding. If possible, secure
the cables to a leg of the printer stand.
Align the paper stack so that the paper feeds straight into
the
tract&s
sprocket units.
Assembling the Printer
Removing the protective materials
During shipping, several pieces of packing material
pro&t
the
printer. Before you assemble the printer, you must remove
these protective materials as shown in the attached Notice
Sheet.
Note:
Installing the ribbon cartridge
Before instaIling the ribbon cartridge, make sufe that the
power cord is
not
plugged into an
eIect&al
outlet.
1-4
Setting Up the Printer