Filter
Top Products
Bad track list
DIAG displays the following prompt for the bad track list:
Mark Bad Tracks (Y/N) ?
Entering the bad track list is optional. If you respond Y to the
above prompt, you see the following menu in a pop-up window:
Add an entry
Revise an entry
Delete an entry
Clear Bad Track list
Save and Exit
You do not need to enter a bad track list for the hard disk that
comes with the Equity LT-286e.
When you execute the Media Analysis test, DIAG
automatically marks the bad tracks when it formats the hard
disk.
Start and end cylinder numbers
DIAG displays the following prompts for the starting and
ending cylinder numbers:
Start cylinder number ?
End cylinder number
?
Enter the first and last cylinder numbers on which you want to
perform the tests. The default for the start cylinder number is 0,
and the default for the end cylinder number is one less than the
highest cylinder number of your hard disk. For a 20MB hard
disk drive, the highest cylinder number is 614. For a 40MB hard
disk drive, the highest cylinder number is 976.
System Diagnostics 23