Filter
Top Products
If you want to create a database, follow these steps:
1.
Type the name (from 1 to 50 characters) that identifies your
company or the computer and press Enter in response to
this prompt:
vendor's name :
(maximum 50 characters)
For example, type
EPSON
and press
Enter.
2.
Type the computer’s model number (from 1 to 8 characters)
and press Enter in response to this prompt:
model number
.
.
(maximum 8 characters)
For example, type
LT-286e
and press
Enter.
DIAG stores this information in a file called DIAGS.CNF.
3.
If a database with this vendor name and model number does
not exist, you see this message:
Database does not exist - press
any key except <Esc> to continue
To create the database, press any key other than ESC.
Now you respond to the screen prompts to update the
configuration. You can accept the default values that DIAG
presents by pressing Enter. When you see the diagram of
the motherboard, press ESC to continue the diagnostics.
If a database with the specified vendor name and model
number exists, you see this message:
Your database already exists -
want to update (Y/N)? N
System Diagnostics
3