Filter
Top Products
Appendix C
Command Summary
This appendix describes all the PIC control codes. They are divided
into these categories:
Near Letter Quality (NLQ)
Character Width (Pitch)
Print Enhancement
Page Formatting
Graphics
User-Defined Characters
Other Codes
Each command has a format section and a comment section.
The
format section gives the ASCII, decimal, and hexadecimal codes
for the command. In some cases there is also a control key code
because some commercial software programs can use a control key
for a code between
0
and
27
(decimal). In this section, CTRL 0, for
example, means hold down the control key while you press 0.
Letters in parentheses, such as (n) or (d), are variables, which are
explained in the comments sections.
C-l