Filter
Top Products
(2) Removal of protective paper for paper end detector
The MX-82 is provided with a protective paper inserted between the inner and
outer paper guides to protect the paper end detector from damage due to
shocks or vibrations during transportation. Before using the Printer, be sure to
remove this paper. If the MX-82 is to be reshipped, remember to return it to the
original position.
(3) Prepare tools
Prepare the following two screwdrivers to disassemble or assemble the printer.
(1) Phillips type screwdriver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
pc
(2) Round-blade type screwdriver ................................................................ 1 pc
Philli[[
Fig. 4 Assembly Tools
(4) Removal of shipping screws
The purpose of the shipping screws is to protect the MX-82 against any damage
that may be caused by shocks or vibrations during transportation. Before operat-
ing the MX-82, remove the screws as described below. (See Fig. 5)
STEP 1. Stand the printer on its left side.
2. Remove with a screwdriver the two shipping screws visible on the un-
derside of the lower case.
Right Side of the Printer
Fig. 5 Removal of Shipping Screws
NOTE: Save the two shipping screws for possible future use
-6-