Filter
Top Products
<SUPPLEMENT>
0
If the printer lid is an obstacle when removing the shipping screws, be sure to
take off the printer lid by observing the following steps. Rough or careless han-
dling of the printer lid may result in damage to, or even breakage of, its hinges.
STEP 1. Stand the printer lid upright.
2. Push the printer lid toward the right and pull up its left side. (See Fig. 6)
Fig. 6 Removal of Printer Lid
0
When remounting the printer lid, be sure to observe the following steps:
STEP 1. Fit the right side of the printer lid onto the projection located at the right
corner of the Printer’s upper case. (See Fig. 7)
2. Fit the left side of the printer lid onto the left projection and push the printer
lid down.
Fig. 7 Remounting of Printer Lid
-7-