Filter
Top Products
8. Raise the two sprocket lock levers to loosen, and adjust the sprocket pin
position to the paper width. (See Fig. 31)
ket Lock Lever
I
Fig. 31 Raising of Sprocket Lock Levers
9. Engage the paper feed holes of the paper on the feeding pins, push the
scale back into position, and adjust the tension of the paper. Then push the
paper holding covers and the two sprocket lock levers down. (See Fig. 32)
NOTE: In this case, confirm that the feeding pins are centered in the re-
spective paper feed holes of the paper. Do not lock the release
Fig. 32 Engagement of Paper Feed Holes on Feeding Pins
-26-