Epson 7000XB, 5000XB Power Supply User Manual


 
3 Using the Projector Menus
50
Video Menu (Image source = Video)
The Video menu enables you to make adjustments to the projected
image. The following options are available when the image source is
Video.
Note: The video source (such as a VCR or camcorder) must be connected
and operating, and the image source on the projector must be set to Video
for you to access these menu options.
Menu item Description
Brightness Lightens or darkens the overall image. Increase brightness to lighten
an image, or decrease it to darken the image.
Contrast Adjusts the degree of difference between light and dark areas.
Increase the contrast to make light areas lighter and dark areas
darker. Decrease it to minimize the difference between the lightest
and darkest areas of the image.
Saturation Adjusts color density. Increase the setting for darker and more
opaque colors. Decrease it for lighter and less opaque colors.
Tint
(NTSC only)
Adjusts the red-green color balance of the screen. Increase tint to add
more green, or decrease it to add more red.
Mode Specifies the video signal system. Normally this signal system setting
should be left at AUTO to automatically detect the type of video
signal. If automatic selection is not possible for some reason, use this
menu to manually specify NTSC, PAL, or SECAM.
pro-ch3.fm Page 50 Friday, November 7, 1997 5:23 PM