Filter
Top Products
Making Detailed Adjustments 43
Customizing Projector Features
Use the settings in this section to adjust the image size and position, suppress on-screen text,
and select basic setup options.
Image Sizing
Before adjusting any of these settings, make sure you have already selected an appropriate
aspect ratio for the type of picture you’re viewing (see page 28).
■ Output Scaling
For component video formats, this setting lets you see the edges of the image that are not
normally visible in the picture (see page 63).
■ Position
Use the arrow buttons to fine-tune the position of the image on the screen.
■ Zoom Caption Pos.
Lets you adjust the shape and position of the image so that subtitles are visible (available
only if the aspect ratio has been set to Zoom). Use
Zoom Size to adjust the proportions
of the image, and
Zoom Caption Pos. to move the image up or down. You can adjust
output scaling before zoom position.
■ Aspect
This setting lets you change the aspect ratio of your image, and works the same as
pressing the
Aspect button on the remote control. See page 28 for more information.
Screen Options
■ Messages
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
Signal Æ Output Scaling
Signal Æ Position
Signal Æ Zoom Caption Pos.
Signal Æ Aspect
Settings Æ Display Æ Messages