Filter
Top Products
48 Maintenance
Cleaning the Projector Case
Before you clean the case, turn off the projector and unplug the power cord.
■ To remove dirt or dust, wipe the case
with a soft, dry, lint-free cloth.
■ To remove stubborn dirt or stains,
moisten a soft cloth with water and a
neutral detergent. Then wipe the case
and dry it with a dry cloth.
Caution: Never use wax, alcohol, benzene,
thinner, or other chemical detergents. These can damage the case.
Cleaning and Replacing the Air Filter
Clean the air filter on the bottom of the projector once every three months, or more often if
you’re using the projector in a dusty environment. If it’s not cleaned periodically, it can
become clogged, preventing proper ventilation and causing overheating and damage to the
projector.
1. Press the P
Power button and wait for the PPower light to stop flashing. The projector
cools down.
2. Turn off the projector using the power switch on the back.
3. Unplug the power cord and disconnect any cables.
4. Turn the projector over.
5. Use a small vacuum cleaner that is designed for computers
and other office equipment to clean the filter, as shown. If
you don’t have one, gently clean the filter using a very soft
brush (such as a clean artist’s paintbrush).
If the dirt is difficult to remove or the filter is broken,
replace it. You can purchase air filter part number
V13H134A09 from an authorized Epson reseller. To find
the nearest reseller, please call 800-GO-EPSON
(800-463-7766). To purchase online, visit
www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).