Filter
Top Products
22
22 | Maintenance and Problem Solving
3. Open the cover on the right side of the SpectroProofer and disconnect
the cable(s).
4. Slide the SpectroProofer out of the printer.
5. Set the SpectroProofer on a flat surface to avoid damaging the lens.
Note:
The 24” model has only
one cable. The 44” model
may have a second cable
connected to the port for
the optional take-up reel.
Warning:
The SpectroProofer is
heavy. Two persons are
required to lift it.
Caution:
Be careful not to scratch
the spectrophotometer
lens when handling the
unit or setting it down.