Filter
Top Products
Insert the edge of the roll paper into the paper slot and turn the
paper-feed knob in the direction of the arrow to feed the paper 5
cm beyond the tear-off edge.
l
Don’t turn the paper-feed knob when the release lever is down.
Paper-feed knob
Raise the head-open lever, unroll the paper a little and pull lightly
from the roll paper side to eliminate twist or misalignment.
Retighten the roll paper to remove any slack. Roth edges of the
paper should be aligned parallel to the paper roll.
Push down the release lever and then the head-open lever. Tear
off any extra paper at the tear-off edge by pulling the paper toward
you.
Close
the
-IO-