Filter
Top Products
waits for the paper feed switch to be
pressed.
After the paper feed switch is pressed,
the printer executes the macro once.
The printer repeats this operation n1 times.
• If this command is received while defining the macro, the
macro definition is aborted, and the definition is cleared.
• If the macro is not defined or if n1 is 0, nothing is executed.
• Paper cannot be fed with the paper feed switch while
executing the macro when n3 is 1.
Not defined.
GS :
ESC = n
Select device
< 1B >
H
< 3D >
H
< n >
0
n
255
Selects a device to receive data from the host computer.
- If the printer is not selected, the TM-T60P ignores all
received data until it is selected by this command.
- Each bit of n is used as follows:
Bit
Function
Value
0
I
1
0
Printetr
Invalid Valid
1
Undefined
2
Undefined
3
Undefined
4
Undefined
5
Undefined
6
Undefined
7
Undefined
• Even when the printer is not selected, it may enter
the BUSY state due to printer operation.
n = 1
-50-