Filter
Top Products
<TM-U300PA/U300PB>
Connect the interface cable according to the following procedure.
➀
Turn off the printer, and the ECR (host computer).
➁
Plug the interface cable connector into the interface connector on the printer.
➂
Squeeze the wire clips together until they lock in place on both sides of the
connector.
➃
Attach the ground wire to the ground connector on the bottom of the printer.
➄
Plug the drawer kick-out cable connector into the drawer kick-out connector on
the printer. (When removing the drawer kick-out cable, press in on the
connectors clip and pulling out.)
Drawer Kick-out Connector
Interface Conne
Drawer Kick-out Cable
7