Filter
Top Products
[Condition]
*
Character font: 7 X 9 font
(with descenders)
*
Printing pattern: ASCII 96-character rolling
pattern continuous printing
-
Temperature:
25°C
4. Roll paper supply device
Supply method:
Roll paper shaft-support loading
Near-end detector:
-
Detection method:
Micro switch
-
Roll paper core inside diameter:
Ø 10.5
to 12.5 mm
-
Near-end adjustment:
Adjustable slider
(Refer to 3-3, Adjusting the Paper Near-End De-
tector)
5. Roll paper take-up device
The TM-U300A and TM-U300PA are equipped with a take-up device. The paper is auto-
matically take-up by the paper feed motor.
6. Auto-cutter
Both the TM-U300A/U300B and TM-U300PA/U300PB are equipped with the auto-cutter.
Full-cut/partial-cut can be executed by commands.
7. Paper
Paper feed method:
Paper feed pitch:
Paper feed speed:
Paper size:
*
Roll paper
Paper width:
Friction feed
Default 1/6 inch
Can be set in 1/144 inch units by software command.
Approx. 4.17 IPS (25 LPS) (continuous feeding)
(IPS: Inches Per Second)
(LPS: Lines Per Second)
76
mm ± 0.5 mm
25