Filter
Top Products
➃
Turn on the printer.
➄ While leaving some slack in the roll paper, insert the end of the roll paper
straight into the paper inlet. The printer automatically feeds the roll paper into
the printer.
➅
Press the FEED switch to continue feeding the paper until it extends about
20 cm beyond tear-off edge.
➆
Remove the take-up spool from the take-up frame.
Remove the side of the spool and insert the end of the paper roll (journal paper
when using 2-ply paper and 3-ply paper) into the groove on the spool and wrap
the roll paper around the spool two or three times.
Install the flange to flange
shaft.
12