Filter
Top Products
Running Tests
Follow these steps to run a test from the Execute menu:
1.
Press
it)
or
m
to select Execute. You see the Execute
menu, such as the following:
System Board
Numeric Coprocessor
System Memory
Diskette Drive A
Hard Disk Drive #1
Serial Port COM1
Parallel Port LPT1
Video Adapter Test
2.
Press
(7)
or
[SJ
to highlight the device you want to test
and press
m
You see the Repeat prompt:
How often to repeat test? 1
3.
If you want to run the test once, press
I.
To run the test
e the number of times you want to run
4. If there is only one test for a device, the program begins
testing immediately. If there is more than one test for the
device, you see a submenu, such as the following:
HARD DISK DRIVE(S) AND CONTROLLER
CHECK MENU
1
- Seek check
2
- Write, read check
3
- Read, verify check
4
- Run all above checks
0
- Exit
Running System Diagnostics
5-5