Filter
Top Products
Special key functions (continued)
hrpo=
Changes the function of the numeric/cursor keys
from entering numbers to positioning the cursor.
=-l-[F1zl
Perform special functions within application
programs.
I
pa
Prints the screen display on a printer.
Generates the System Request function in some
application programs (used with
I)],.
lserdllpal
Controls scrolling in some applications.
Ipwrrl
Suspends the current operation.
m
Stops the current operation (used with
[CM]).
The
[$GLiC),
[lunlodr],
and
[*a]
keys work as toggles; press
the key once to turn on a function and again to turn it off. When
the function is enabled, the corresponding light in the upper
right comer of the keyboard is lit.
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. If you have entered an MS-DOS or application
program command that you want to stop, try one of the
following:
Q
Hold down
i
and press
[cl
P
Hold down
[ctrll
and
press
m.
If these methods do not work, you may need to reset the
computer as described below. Do not turn off the computer to
exit a program or stop a command unless you have to, because
the computer erases any data you did not save.
Using Your Computer
1-21