Filter
Top Products
Accessing Your System
If you have forgotten your current password, follow these steps
to access your system:
1.
2.
Turn off the computer.
Follow the instructions
under “Jumper Settings” in Chapter 3
to disable the password function by setting jumper JP6 to
position A.
3.
4.
5.
Turn on the computer.
When you see Press <F2> to run SETUP, press
[F2J.
You see the SETUP screen. If you do not want to set a new
password, go to step 7. If you want to set a new password,
go to step 6.
6.
To set a new password, highlight
Password
and press
IEnlw].
Then press
b
F2
Type a new password at the prompt and
press
[burl.
You must enter the new password twice. (See
Chapter 2 of the
Setup Guide
for more information about
setting a password.) Now go to step 8.
7.
To disable password checking, highlight
Password
security and press
[Enbrl.
Then press
m
or
m
to
change the setting to
Not
installed.
(See Chapter 2 of
the
Setup Guide
for more information.)
8.
Save your settings
as
you exit SETUP. (See Chapter 2 of the
Setup Guide
for instructions.)
9.
Turn off the computer.
10. Follow the instructions under “Jumper Settings” in
Chapter 3 to enable the password function by setting
jumper JP6 to position B.
7-10 Troubleshooting