Filter
Top Products
Parent topic: Setting Up Fax Features Using the Product Control Panel
Receive Settings - Fax
Set the receive options you want to use for incoming faxes.
Setting Options Description
Receive Mode Manual Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product.
Auto Automatically receives and prints faxes.
Distinctive Ring All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
Single
or more phone numbers to the same line and assign
Double different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
Triple
product can receive faxes on the correct number of
Double&Triple rings. All works for phone lines that do not use this
service.
Rings to Answer 1 to 9 Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to for answering a call.
Remote Receive Off Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
On
is set to Auto). When you enable this function, you
Start Code need to set a Start Code. If you are using a cordless
handset whose base is connected to the product, you
can start receiving the fax by entering the code on the
handset.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Security Settings - Fax
Set the security options you want to use for fax data.
171