Filter
Top Products
2. Lift up the scanner unit and check to see if the ink cartridge holder is in the far right position (the
home position). If not, turn on the product, wait for the ink cartridge holder to move, then turn the
product off again.
3. Secure the ink cartridge holder to the case with tape.
Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damage
your product.
4. Lower the scanner unit.
5. Remove all the paper from the product.
6. Unplug the power cable.
7. Disconnect any connected cables.
8. Close the output tray and paper support.
9. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product.
Keep the product level during transportation. Be sure to remove the tape from the ink cartridge holder
before turning on your product. If print quality has declined when you print again, clean and align the
print head.
Parent topic: Cleaning and Transporting Your Product
Related concepts
Print Head Cleaning
236