Filter
Top Products
Limitation of the Number of the Target Projectors when Using Multiple Projectors
55
Limitation of the Number of the Target Projectors when Using Multiple Projectors
When an ID is set for the projector and the remote control, you can use
the remote control to operate only the projector with a matching ID. This
is very useful when managing multiple projectors.
You can set an ID for the projector within a range of "1" to "9". The
default value is Off.
You can set an ID for the remote control within a range of "0" to "9". The
default value is "0". When the ID switch on the side of the remote control
is set to Off, you can operate all projectors by the remote control
regardless of the ID setting for the projector or the remote control.
The following table shows the possible combinations of projector ID and
remote control ID.
When Remote Control Type is set to Simple from Operation in the
configuration menu, you cannot set the remote control ID.
Operation Combinations Descriptions
Possible Projector ID: 1 When the control
switch is set to On, and
Projector ID matches
the remote control ID,
you can operate the
projector with the
remote control.
ID switch: On
Remote control ID: 1
Possible Projector ID: 1 When the ID switch on
the side of the remote
control is set to Off, you
can operate the
projector with the
remote control
regardless of the
projector's ID setting.
ID switch: Off
Remote control ID: 3
Possible Projector ID: Off When the Projector ID is
Off, you can operate
with the remote control
regardless of the
remote control ID
setting.
ID switch: On
Remote control ID: 1
Possible Projector ID: 1 When the remote
control ID is "0", you can
operate with the
remote control
regardless of the
Projector ID setting.
ID switch: On
Remote control ID: 0
Not
possible
Projector ID: 1 When the remote
control switch is On,
and Projector ID and
remote control ID do
not match, you cannot
operate with the
remote control.
ID switch: On
Remote control ID: 3
Operation Combinations Descriptions