Filter
Top Products
Hardware Installation
EVGA
5
1 - Floppy Cable
Used to attach a floppy drive to the motherboard.
1 - 2-Port SATA Power Cable
Allows a Molex power connector to adapt to a
SATA power connector.
2 - SATA Signal Cable
Used to support the Serial ATA protocol and each
one connects a single drive to the motherboard.
1 - IDE-ATA 133 HDD Cable
Passes data between the IDE connection on the
motherboard and IDE device.
1 - Driver Installation CD
Contains drivers and software needed to setup the
motherboard.
EVGA nForce 730i
Motherboard
The EVGA nForce 730i motherboard with the NVIDIA GeForce
9300/nForce 730i single chip is a PCI Express, NVIDIA GeForce Boost
Technology ready motherboard. Figure 1 shows the motherboard and Figures 2
shows the back panel connectors.