Filter
Top Products
EVGA
10
Note: Make sure the CPU is fully seated
and level in the socket.
7. Close the load plate over the CPU
and press down while you close
and engage the socket lever.
Installing the CPU Fan
There are many different fan types that can be used with this motherboard.
Follow the instruction that came with you fan assembly. Be sure that the fan
orientation is correct for your chassis type and your fan assembly.
Installing System Memory (DIMMs)
Your new motherboard has four 240-pin slots for DDR2-800 memory. These
slots support 256 MB, 512 MB,1 GB, and 2Gb DDR2. There must be at least
one memory bank populated to ensure normal operation. Use the following the
recommendations for installing memory. (See Figure 1 on page 6 for the
location of the memory slots.)
One DIMM:
Install into slot 1. You can install the DIMM into any slot, however, slot 1 is
preferred.
Two DIMMs:
Install into either slots 1 and 3 or 2 and 4. The four DIMM sockets are
divided into two colors to help you identify the channel pairs. To obtain best
performance, simply mount DIMM sockets of the same color.
Four DIMMs:
Install into slots 1, 2, 3, and 4.