Filter
Top Products
EVGA
44
Storage Config
Press Enter to display the Storage Config menu.
DMA transfer access
Use this function to enable or disable DMA transfer access.
Prefetch Mode
Use this function to enable or disable the
Prefetch mode.
HDD Block Mode
Using this function on the Integrated Peripherals menu allows your hard drive
needs to support block mode. Select
[Enabled] to automatically detect the
optimal number of block read/writes per sector the drive can support. Select
[Disabled] if your drive does not support block mode.
SATA Controller
This function allows you to enable specific SATA controllers, enable all
controllers, or disable all controllers.
SATA Operation Mode
This is allows you set the onboard Serial SATA mode.
¾ IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage
devices.
¾ RAID: Create a RAID 0, 1, 0+1, 5 and JBOD configuration.
¾ AHCI: Use the AHCI (Advanced Host Controller Interface) to enables
advanced SATA features for improved performance with NCQ and
Hot-plug features
¾ Linux AHCI: Use the function for Linux AHCI.
DMA transfer access [Enabled]
Prefetch Mode [Enabled]
HDD Block Mode [Enabled]
SATA Controller [Enabled]
SATA Operation Mode [IDE]
SATA SALP Features [OFF]
JMB363 ATA Controller [Enabled]
JMB363 Mode [IDE]