Filter
Top Products
EVGA
60
¾ Expert
Use the
Page Up and Page Down keys to select Expert. When Expert is
selected, all timing categories are enabled for manual input. Note that you
should set the value to Optimal to use the manufacturers’ recommended
values.
¾
tCL: CAS# latency (options are Auto and 1 through 7).
¾
tRCD: RAS#-to-CAS# Delay for Read/Write commands to the
same bank (options are Auto and 1 through 7).
¾
tRP: Row Precharge time. This is the Precharge-to-Active or Auto-
to-Refresh of the same bank (options are Auto and 1 through 7).
¾
tRAS: This is the minimum RAS# active time (options are Auto and
1 through 31).
¾
Command Per Clock: This is the command timing setting on a per
clock unit basis (options are Auto, 1 Clock and 2 Clock).
¾
tRRD: RAS#-to-RAS# delay of different banks (options are Auto
and 1 through 15).
¾
tRC: RAS#-to-RAS# or auto refresh time of the same bank (options
are Auto and 1 through 31).
¾
tWR: The Write recovery time (options are Auto and 2 through 6).
¾
tWTR: This is the minimum write-to-read delay with the same chip
selected (options are Auto and 1 through 15).
¾
tREF: This is the DRAM refresh rate (options are Auto, 7.8uS, and
3.9uS)..
Parameters Settings Current Value
Memory Timing Setting [Expert]
tCL (CAS Latency) [Auto(7)] 7
tRCD [Auto(7)] 7
tRP [Auto(7)] 7
tRAS [Auto(20)] 20
Command Per Clock (CMD) [Auto(1T)] 1T
** Advanced Memory Settings **
tRRD [Auto(4)] 4
tRC [Auto(27)] 27
tWR [Auto(10)] 10
tWTR [Auto(14)] 14
tREF [Auto] 7.8uS