Filter
Top Products
CrossPoint / MAV Matrix Switchers • Remote Control
Remote Control, cont’d
4-4
CrossPoint / MAV Matrix Switchers • Remote Control
4-5
Refer also to the CrossPoint 450 Plus / MAV Plus User’s Manual at www.extron.com. Refer also to the CrossPoint 450 Plus / MAV Plus User’s Manual at www.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Create ties
N
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*24$.
•
The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
N
When you create a tie where X! = 00, you tie no input to the specified output (X@) (untie X@).
When you create a tie where X@ = 00, you untie all outputs from input X!.
N
The & tie command for RGB and the % tie command for video can be used interchangeably.
N
The & read tie command for RGB and the % read tie command for video can be used interchangeably.
Tie input X!
to output
X@
, video
and audio
X!*X@! OutX@•InX!•All] Tie input X!‘s video and audio to output X@.
Example:
1*3!
Out03
•In01•All]
Tie input 1 video and audio to output 3.
Tie input
X!
to output
X@
, RGBHV
X!*X@& OutX@•InX!•RGB]
Tie RGB only (video breakaway).
Example
(see 3rd Note, above):
10*4&
Out04
•In10•RGB]
Tie input 10 RGB to output 4.
Tie input
X!
to output
X@
, video
X!*X@% OutX@•InX!•Vid]
Tie video only (video breakaway).
Example
(see 3rd Note, above)
7*5%
Out05
•In07•Vid]
Tie input 7 video to output 5.
Tie input
X!
to output
X@
, audio
X!*X@$ OutX@•InX!•Aud]
Tie audio only (audio breakaway).
Example:
24*04$
Out04
•In24•Aud]
Tie input 24 audio to output 4.
Read RGB output tie
X@& X!] RGBHV input X! is tied to output X@.
Read video output tie
X@% X!] Video input X! is tied to output X@.
Read audio output tie
X@$ X!] Audio input X! is tied to output X@.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Video and audio mute commands
RGB/video mute
X@*1B VmtX@*1] Mute output X@ RGB (video off).
RGB/video unmute
X@*0B VmtX@*0] Unmute output X@ RGB (video on).
Read RGB/video mute
X@B X#]
1 = mute on, 0 = mute off.
Global RGB/video mute 1*B
Vmt1
]
Mute all RGB outputs.
Global RGB/video unmute 0*B
Vmt0
]
Unmute all RGB outputs.
Audio mute
X@*1Z AmtX@*1] Mute output X@ audio (audio off).
Audio unmute
X@*0Z AmtX@*0] Unmute output X@ audio (audio on).
Read audio mute
X@Z X#]
1 = mute on, 0 = mute off.
Global audio mute 1*Z
Amt1
]
Mute all audio outputs.
Global audio unmute 0*Z
Amt0
]
Unmute all audio outputs.
View output mutes
EVM}
X$
1
, X$
2
, ... X$
n
]
Each X$ response is the mute status of an output,
starting from output 1.
n = the maximum number of outputs for this model.
Example:
CrossPoint 450 Plus 6432 HVA
EVM} Mut02202000000000000000000000000000]
Output 2, 3, and 5 audio is muted. All other
outputs are unmuted.
N
The “Mut” portion of the response appears only when the switcher is in Verbose mode 3. See the Verbose mode command on page 4-.
N
X! = Input number
00 – (maximum number of inputs for your model) (00 = untie)
X@ = Output number 00 – (maximum number of outputs for your model)
(00 = untie all outputs)
N
X@ = Output number 01 – (maximum number of outputs for your model)
X# = Mute 0 = off (unmuted)
1 = on (muted)
X$ = Video/audio mute: 0 = no mutes
1 = video mute
2 = audio mute