Filter
Top Products
Operation, cont’d
MAV Series Switchers • Operation3-10
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC VIDEO AUDIO
12
9101112
8
CONTROL I/O
13
13
14
14
15
15
16
16
VIDEO
E
83
AUDIO
E
LED key: = off, = on
Press
Figure 3-10 — Example 4, step E: Viewing the current configuration,
audio only
F
Press and release the Video and Audio buttons to toggle the Video LED on
and the Audio LED off (figure 3-11).
If video ties are established for input 5, the output LEDs for all video outputs
tied to input 5 light. If no ties are established for input 5, all output LEDs turn
off.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC VIDEO AUDIO
12
9101112
8
CONTROL I/O
13
13
14
14
15
15
16
16
F
831 4
VIDEO AUDIO
F
LED key: = off, = on
Press
Press
Figure 3-11 — Example 4, step F: Viewing the current configuration,
video only
Muting and unmuting video and/or audio
Individual outputs can be muted or unmuted by doing the following:
1. Press the Esc button to clear any input LEDs, output LEDs, or control LEDs
that may be on.
2. Press and release the View button.
3. Select video, audio, or both to mute or unmute by pressing the Video and/or
Audio buttons.
4. One at a time, press and hold the output button(s) for the desired output(s)
for approximately 2 seconds. The output LED(s) for the selected output(s)
blink to indicate the mute or return to their previous state to indicate the
unmute.
5. Press and release the View button to return to normal switcher operation.
1. You can mute video and audio, video-only, or audio-only outputs.
Pressing and releasing the Video and Audio buttons toggles each selection
on and off.