Extron electronic MLC 104 Plus Series Switch User Manual


  Open as PDF
of 60
 
MLC 104 Plus Series • Software Setup
3-15
Step ten: assign IR drivers
The IR Conguration tab of Global Congurator allows you to
assign a device driver to each IR port of the device.
To assign an IR device driver:
1. Select an IR port in the IP Link Tree window.
The IR Conguration tab opens.
2. Select IR in the Port Type eld.
3. Select a device type, manufacturer, and version.
4. Select an available driver.
5. Click Add Driver.
 previous next