Extron electronic MSW 4SV RS Switch User Manual


 
Introduction
This guide describes the function, installation and operation of the Extron MSW 4V rs
and MSW 4SV rs mini video switchers. Unless otherwise stated, the terms “MSW” and
“switcher” refer to both models.
About the MSW 4V rs and MSW 4SV rs Switchers
The Extron MSW 4V rs and MSW 4SV rs are four-input, two parallel output, mini video
switchers (MSWs).
The MSW 4V rs switches between a maximum of four NTSC, PAL, or SECAM composite
video inputs on female BNC connectors and produces two identical video outputs
on female BNC connectors (see figure 1 on page 2). The video output is a buffered,
composite signal.
The MSW 4SV rs switches four S-video (luminance [Y] and chrominance [C]) inputs on
4-pin mini DIN connectors. The selected S-video input is split, buffered, and output on two
connectors (see figure 2 on page 2):
One S-video output on a 4-pin mini DIN connector
One composite video output on a female BNC connector
These mini video switchers can be operated from the front panel or via a contact closure
device connected to the rear panel, such as an Extron CCR 204 Four-Button Contact
Closure Remote or an IR 102 Remote Control Kit. The MSW Series include RS-232
communication, allowing control via the Extron Simple Instruction Set (SIS
) or the
Universal Switcher Control Program software.
They also feature a front panel selectable auto switch mode that automatically switches to
the highest numbered input that has an active sync pulse present.
Features
Inputs — four female 4-pin mini DIN connectors for S-video or four female BNC
connectors for composite video
Outputs — one BNC and one 4-pin mini DIN for S-video or two BNC connectors for
composite video (both models feature two parallel outputs for simultaneous monitor and
projector viewing)
Video Mute — the video output can be muted using front panel controls
Serial control — through an RS-232 port
Video compatibility — with NTSC, PAL, and SECAM video formats
Non-volatile memory — Retains unit settings after power loss
Firmware upgrades — available for download from the Extron Website.
Remote control — through contact closure
Ability to detect an active signal
Built-in video encoder (MSW 4SV rs model only) — for composite video output
MSW 4V rs and MSW 4SV rs • Introduction 1