Filter
Top Products
Installation
Overview
This section provides brief instructions for installing and operating either the MSW 4V rs or
the MSW 4SV rs switcher. Users are advised to follow the links to obtain more information,
elsewhere in this guide, about each step.
Mount the switcher in a suitable location.
Connect the composite and S-video (MSW 4SV rs only) inputs to video sources.
Connect the composite and S-video (MSW 4SV rs only) outputs to video displays.
Connect the power supply (provided).
CAUTION: Read the cautions on page 6 before connecting a power supply to
the switcher.
Connect the RS-232 captive screw connector to a control device such as a
computer or IP Link controller (for use with an Extron TouchLink panel).
Connect the Contact captive screw connector as required.
Power on the switcher and all connected devices.
Set up the auto switching mode and video mute. These can be initiated through
the front panel buttons, the Universal Switcher Control Program, or by SIS
commands.
Select an input channel.
MSW 4V rs and MSW 4SV rs • Installation Overview 3