Filter
Top Products
Specifications and Part Numbers, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Specifications and Part NumbersA-2
Specifications and Part Numbers
Specifications
Video
Routing
MVX 44 VGA A................ 4 x 4 matrix
MVX 48 VGA A................ 4 x 8 matrix
MVX 84 VGA A................ 8 x 4 matrix
MVX 88 VGA A................ 8 x 8 matrix
Gain ............................................... Unity
Bandwidth .................................... 300 MHz (-3 dB), fully loaded
Crosstalk ....................................... <-60 nominal dB @ 10 MHz, <-39 dB @ 100 MHz
Switching speed ........................... 20 ms (max.)
Video input
Number/signal type
MVX 44/48 VGA A ......... 4 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level
and tri-level sync), S-video, composite video
MVX 84/88 VGA A ......... 8 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level
and tri-level sync), S-video, composite video
Connectors
MVX 44/48 VGA A ......... 4 female 15-pin HD
MVX 84/88 VGA A ......... 8 female 15-pin HD
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ...... Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 145 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Return loss .................................... <-40 dB @ 5 MHz
DC offset (max. allowable) ......... 1.5 V
Video output
Number/signal type
MVX 44/84 VGA A ......... 4 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level
and tri-level sync), S-video, composite video
MVX 48/88 VGA A ......... 8 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level
and tri-level sync), S-video, composite video
Connectors
MVX 44/84 VGA A ......... 4 female 15-pin HD
MVX 48/88 VGA A ......... 8 female 15-pin HD
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ...... 0.3 V to 1.5 Vp-p (follows input)
Impedance .................................... 75 ohms
Return loss .................................... <-40 dB @ 5 MHz
DC offset ....................................... <20 mV with input at 0 offset
Switching type ............................. Triple-Action switching