Filter
Top Products
PCM 240 Projector Ceiling Mount • Introduction
2
Introduction
PCM 240 Projector Ceiling Mount • Introduction
3
Features
• Projector mount for suspended ceilings with 2' x 2' or 2' x 4'
tile grids
• Provides time- and cost-effective integration of projectors in
small boardrooms and classrooms
• Includes knockout openings for two (one 1-gang and one
2-gang) junction boxes or for use as cable pass-throughs.
• One 1.5" threaded pipe adapter is provided for mounting a
projector mounting pole.
• Adjustable mounting pole adapter plate for correct alignment.
• Holds up to 50 pounds (23 kgs) of A/V equipment and
3" deep, ¼ rack devices when correctly installed
• Three methods of suspension: ceiling anchors, turnbuckles
and tie wire (60 foot supplied) to structural ceiling
(concrete or wood joists); turnbuckle and tie wire looped
over ceiling trusses; or threaded rod (not supplied)
Optional accessories
Optional equipment to complement the PCM 240 includes:
• PMK 350 Low Profile Projector Mounting Kit —
The Extron PMK 350 securely mounts several quarter rack
width products, or multiple products and a power supply
to a projector ceiling mounting pole. It uses only
2" (5 cm) between the projector and the ceiling to
conveniently and securely enclose the products out of
sight above the display device.
• PMP Series Projector Mounting Poles — Available in fixed
lengths of 4" (10 cm), 6" (15 cm), 10" (25 cm), and
12" (30 cm), PMP Projector Mounting Poles are used
with the PCM 240 and UPB 25 to create individualized
installations. Each pole includes a cutout, which provides
convenient cable access.
• UPB 25 Universal Projector Mounting Bracket — The Extron
UPB 25 universal projector mount is compatible with
nearly every projector having a weight of up to 25 pounds
(11 kg). It features independent adjustment of roll
(±4 degrees of horizontal tilt), pitch (±25 degrees of
vertical angle) and yaw (360 degrees of rotation on a pole
mount, or 10 degrees when mounted flush to the ceiling)
for precise control of each axis and exact alignment of
the projector. Locking mechanisms maintain the original
positioning settings when servicing requires the projector
and attached arm assembly to be removed from the
mounting assembly.
About this Manual
This manual discusses how to safely install and use the
Extron PCM 240 Projector Ceiling Mount.
About the PCM 240 projector ceiling mount
The Extron PCM 240 Projector Ceiling Mount is a versatile
ceiling plate for installation in classrooms or boardrooms with
2' x 2' or 2' x 4' T-bar style suspended ceiling. The PCM 240
should be secured to the structural ceiling, above the suspended
ceiling tiles, using turnbuckles and tie wire. Once secured in
place, it is easily fixed to the suspended ceiling T-bar with the
supplied screws. When properly installed, it can hold up to
50 pounds (23 kgs) of A/V equipment. The projector mounting
pole is easily installed in the threaded pipe adapter mounted
on a sliding plate, allowing horizontal adjustment for correct
alignment. The PCM 240 includes mounting holes for Extron 3"
deep, ¼ rack wide devices (e.g. MPA 122), and has two openings
for Raco (catalog #8471) or UL junction box insertion, providing
integral power access points, video connection, or simple cable
pass-throughs.
Extron
UPB 25
Universal Projector
Mounting Bracket
Extron
PCM 240
Projector Drop
Ceiling Mount
Extron
PMK 350
Low Profile
Projector
Mounting Kit
Extron
Power Supply
for MPA 122
Projector
Extron
PMP
6”, 10“ or 12”
Projector Mount
Pole
B
A
S
S
L
E
V
E
L
T
R
E
B
L
E
M
I
N
I
P
O
W
E
R
A
M
P
L
I
F
I
E
R
M
P
A
12
2
O
N
O
F
F
L
I
MI
T
E
R
S
T
E
R
E
O
D
U
A
L
M
O
N
O
Extron
MPA 122
Mini Power
Amplifier
Figure 1 — Typical application of PCM 240