Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
5
-
51
Step Procedure
3
Verify if the Horizontal Image Position Setting is set correctly or incorrectly.
See the graphic below.
• If the white border is on the leading edge of the card, adjust the
Horizontal value by +2.
• If the white border is on the trailing edge of the card, adjust the Horizontal
value by -2.
a. Click on OK.
b. Run a self-test.
c. If the white border is diminished, continue the adjustment until it is gone.
Graphic A