Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)
65
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Power button /
LED
Printer connected to the PC:
• The Power button turns the Printer ON and OFF. (Note: When lit,
the blue LED light indicates when power is ON.)
• Press the Power button to turn the Printer ON and OFF.
• The blue LED above the button turns OFF or ON to indicate when
power is applied. (Note: This LED will flash when the Printer is
processing a print job.)
• If the Power button is pressed during a print job, the print job will be
lost and the Printer will reset (depends on Windows configuration).
Printer not connected to the PC:
• Press the Power button to turn the Printer ON and OFF. (Note:
The blue LED above the button turns OFF or ON to indicate when
power is applied. This is the only active button when the Printer is
not connected to the PC.)
• All other buttons will not function and a Card Printer self-test will not
be possible. (Note: When the Printer is not connected and the
Card Cartridge and Ink Cartridge are not installed, only the Ink LED
will flash as this is controlled by firmware.)
• The Card LED will not flash in this mode when the Card Cartridge is
not installed. (Note: The Printer must be connected to the PC for
the Card LED to flash.)
(Note: Avoid pressing multiple buttons simultaneously or pressing and
holding a button or combination of buttons.)
See the description (above) for the Power button / LED.
X
CANCEL
Button
INK
LED
CARD
Button /
LED
POWER
Button /
LED
Continued on the next page