Filter
Top Products
Navy Gateway (GW0016)
System Manual
The system consists of:
• One Gateway box to interface
with engine and external
senders and sensors.
• One 4” Tachometer with Fuel
Monitor
• Various 2” instruments,
including but not limited to
• Voltmeter
• Oil Pressure gauge
• Fuel gauge
• Engine Temperature gauge
• Transmission Temperature
Quick operation:
1. To turn on the system: Turn the ignition
key to “ON” position.
2. To turn off the system: Turn the ignition
key to “OFF” position.
3. To turn on instrument lighting: Turn
on the light switch on the vehicle instrument
panel.
4. To turn off instrument lighting:
Turn off the light switch on the vehicle
instrument panel.
5. To change the lighting intensity,
(requires the light switch be turned on):
a. Turn on the light switch as described in
item 3 above.
b. Pushing the “UP” button on the tachometer
will increase the intensity of the instrument
lighting. When maximum intensity is
reached no further changes can be effected
by pushing the “UP” button.
c. Pushing the “DOWN” button on the
tachometer will decrease the intensity of
the instrument lighting. When minimum
intensity is reached no further changes can
be made by pressing the “DOWN” button.
6. To disable the audible alarm in normal
mode: PUSH and HOLD both the
“UP” and the “DOWN” buttons on the
tachometer until the beeping stops.
7. To change the LCD display (engine
hour meter, system voltage):
a. Pressing the “Mode” button on the
tachometer will select the next LCD
display.
b. Press the “Mode” button repeatedly
until desired function is displayed. The
gateway will switch to a screen displaying
the function data within 2 seconds after the
button is pressed.
8. To reset Trip Fuel Consumed:
a. Use quick operation 7 above to show
“CLR TRP” on the LCD. Hold the “M”
button for more than one second while the
LCD displays “CLR TRP” to clear the trip
amount.
Page 2